Well I made it to the grout stage. Thanks for all your help getting me here.
I have a grout question.
On step 10 of the tiling a custom shower web page you recommend grouting the corner joint and then putting a bead of clear silicone over it. A more recent post on your facebook page you recommend using a caulk to fill corner joints and going over with a caulking tool and a wet sponge. Which is your preferred method?
How often do you change the water? Is the dirty water safe to flush down the toilet?
You can flush it. I change water often. Change it every 100 sq ft and that should be good.
Do you need to seal porcelain tile at all? If so is it prior to or after grouting?
No, you don’t.
Hi Joe
Well I made it to the grout stage. Thanks for all your help getting me here.
I have a grout question.
On step 10 of the tiling a custom shower web page you recommend grouting the corner joint and then putting a bead of clear silicone over it. A more recent post on your facebook page you recommend using a caulk to fill corner joints and going over with a caulking tool and a wet sponge. Which is your preferred method?
Thanks Again
–Mike
Hi Joe
I have another grout question about grouting the area where the Schluter Jolly and the tile meet.
Because the joint is less than a 1/8 grout joint, is it better to use a caulking grout or ordinary grout?
Thanks
–Mike